Sign in   |   Help   
   Products   |   Support   |   Technologies   |   Company   |   Where To Buy
Product Specifications
 
Sales & Supports
 

8120-B1 is ADSL/ADSL2/ADSL2+ series of customer premise equipment that provides high-speed asymmetrical data transmission on a single twisted copper pair. The DSL line interface supports various ADSL standards, up to ADSL2+. At the DTE side the CPE provides four 10/100 Ethernet interface for easy connection to user’s PC or LAN environment. With built-in IP routing, NAPT and firewall, the unit serve as the gateway to the Internet world. 8120-B1 offers remote management ability supports auto-configuration server based on DSL forum standard TR-069

    • Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), G.992.5 (ADSL2+) and ANSI T1.413 Issue 2.
    • ADSL2/2+ Annex M supported on selected models which can support enhanced upstream rate up to 3 Mbps*
    • Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
    • ADSL2+ compliance raises downward link rate up to 24 Mbps*
      *Actual maximum rate depends on network configuration and operating conditions
    • Built-in four 10/100 Base-TX Ethernet port for PC or LAN connection, supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
    • RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL. Support bridging, MER, IPoA, PPPoA and PPPoE
    • Support Networking protocols such as PPP, IP routing, NAPT, firewall, DHCP server/relay/client
    • Interchangeable between Bridge or Router mode
    • Support local and remote configuration and management through Web, Telnet or SNMP
    • Simple firmware upgrade via TFTP, FTP or HTTP

Management / Support

    • Support Annex M, TR-069
    • User-friendly embedded web configuration interface with password protection
    • Remote management access control
    • Firmware upgrades through HTTP or TFTP
    • SNMPv1/v2 agent with rfc2662 ADSL line MIB, rfc2515 ATM MIB, MIB-II
    • Support diagnostic function (ADSL BER test /PPPoE server discovery etc.)
    • Interface via serial port, telnet, or ssh
    • Menu-driven CLI via serial port or telnet
    • PSI configuration file upload and download
    • Date/time update from SNTP Internet Time Server

 

Sales   |   Support   |   Feedback   |   Trademark   |   Careers   |   Site Map   |   Privacy Policy   |   Terms   |   Contact
Copyright © 2006 Innoband Technologies, Inc. All rights reserved.